Assembly instructions:
Preparation:
- Make sure that you have the correct mudguards for the respective bike size. Each bike size has a specific mudguard size. Therefore, check the size of your bike to ensure that you are using the right mudguards.
Fitting the front mudguard:
- Position the front mudguard near the fork of the bike.
- Attach the mudguard to the mounting holes provided on the fork using the screws supplied.
Tighten the screws firmly, but take care not to overtighten the mudguard.
Fitting the rear mudguard:
- Attach the rear mudguard to the rear axle and ensure that it is correctly aligned.
- Attach the mudguard using the brackets and screws supplied.
- Make sure that the distance between the mudguard and the tyre is even.
Possible difficulties:
Unsuitable mudguard size:
If you have problems fitting the mudguards or they do not fit properly, check that you have the correct size for your bike. Each bike size requires a specific mudguard size that is adapted to the bike.
Fastening problems:
If the mudguards do not attach properly in the intended places, it could be due to inaccurate alignment of the attachment points or screws that are too tight. Check the alignment and make sure that you tighten the screws evenly.
If you have any uncertainties or problems, you are welcome to contact our support team.